General Purpose Kit

Includes the new switch mode continuous power supply.

This unit supplies high current 40amps output in a light weight compact size case. It is suitable for a variety of uses including Selective Area Electroplating. In addition the variable output from 1 - 15 volts can be selected to suit the plating application from pre-treatment to copper or nickel plating.

Features:

• 40amp current output
• High efficiency
• Adjustable voltage 1 - 15 volts
• Light weight small size
• Overload and temperature protection
• Separate reversing switch for polarity changes
• Metal housing
• Analogue instruments for ease of reading

The Alkaline copper will give a coverage of 230 sq inches at a thickness of 0.001" (1 thou) also when applied directly to steel will not cause a chemical reaction.The Nickel will give a coverage of 250 sq inches at 0.001" and is also used as a bond coat under other metals

• 1 x 40 amp Constant Current Power Supply 1 - 15volt variable
• 1 x Reversing switch for pre-treatment current combinations
• 1 x anode kit comprising:
• o 2 x 4 feet connecting wires (red & black)
• o 3 Banana plugs (2 red, 1 black)
• o 1 alligator clip (black)
• o 5 Fine Carbon Brush Plating anodes & bonnets
• 1 litre Alkaline Copper Brush Plating solution 230 sq inches coverage
• 1 litre Nickel Brush Plating solution 250 sq inches coverage
• 1 litre Cleaning and deoxidising Brush Plating solution
• 1 litre Etch/activator No. 3 Brush Plating solution
• 1 litre Etch/activator No. 4 Brush Plating solution
• Brush Plating Instruction Manual

Refills are available for all the plating solutions, plus many other solution are available please see the shop contents.